Voice Control Commands
- These voice commands can be used anytime, if you have focus in the AutomotiveHolodeck window (click inside the window to get focus) and if the VoiceMacro application is running in the background
- ‘Start Calibration’ or ‘Calibration’
- Start the AutoIPD calibration
- ‘Show Map’ or ‘Enable Map’ or ‘Open Map’
- Show the interactive map for teleportation
- ‘Hide Map’ or ‘Disable Map’ or ‘Close Map’
- Hide the interactive map for teleportation
- ‘Change Color’ or ‘Switch Color’
- Change car color
- ‘Start Engine’ or ‘Turn Engine On’
- Start engine (only starts audio track)
- ‘Stop Engine’ or ‘Turn Engine Off’
- Stop engine
- ‘Change Wheels’ or ‘Next Wheel’
- Change wheels
- ‘Open Door’ or ‘Open’
- Open the closest door
- ‘Open Doors’ or ‘Open All Doors’
- Open all doors
- ‘Close Door’ or ‘Close’
- Close the closest door
- ‘Close Doors’ or ‘Close All Doors’
- Close all doors
- ‘Lights On’ or ‘Turn Lights On’
- Turn the lights on
- ‘Lights Off’ or ‘Turn Lights Off’
- Turn the lights off
- Notes (if the voice commands are not working correctly)
- check that the microphone level is properly set to a value between 75-85 (either through Windows Sound settings or Settings tab in VR Tool application) or fine tune this value according to the surrounding noise level
- check that the English speech recognition Language pack is properly installed and enabled on your computer (in Windows Settings – Region & language)
- reinstall the driver of the XTAL sound card through the Windows Device Manager
- open the VoiceMacro application window (by clicking on the VoiceMacro icon in notification area) and make sure that the Listen button is active
This page was last modified on March 8th, 2023 at 16:36
< PreviousNext >