Setup

  • Start the VRG Tool service application
  • Make sure that the VRG Runtime is installed and updated
  • Make sure that the SteamVR Driver is disabled
  • Make sure that you have the correct Tracking option selected
    • use ‘IMU’ if you are using the XTAL internal IMU sensor without any additional room-scale tracking
    • use ‘SteamVR’ if you are using the Lighthouse/SteamVR tracking system
  • Check that the Ultraleap Tracking Control Panel is running
  • Download DuplexPlayer installer or portable archive from the DuplexPlayer folder
    • the installer and portable version are functionally identical
    • the portable version only contains 3 example 360° images, while the installer version also contains an example 360° video file
  • Install DuplexPlayer using the downloaded installer, or unzip the portable archive
  • Start DuplexPlayer.exe

This page was last modified on March 22nd, 2025 at 16:18

< PreviousNext >