IMU
IMU page contains specific options for the internal IMU sensor.
- Enable
- Can be used to select IMU as currently active tracking system.
- This option corresponds to the Active Tracking option on the Tracking – Overview page, so any previously selected active tracking system will be replaced by IMU if enabled.
- Sensor Calibration
- If you are using the IMU tracking option, we recommend recalibrating the sensor each time after starting a VR application, to limit the drift of the accelerometers/gyroscope.
- Make sure that the headset is stable (not moving) before taring the IMU sensor (otherwise the accelerometers will not be calibrated properly, and the tracking can start drifting by itself).
- Output Data Statistics
- Shows detailed statistics of real-time data from the IMU sensor.
This page was last modified on April 4th, 2025 at 17:21
< PreviousNext >