OptiTrack

OptiTrack page contains specific options for the OptiTrack tracking system.

  • Enable
    • Can be used to select OptiTrack as currently active tracking system.
    • This option corresponds to the Active Tracking option on the Tracking – Overview page, so any previously selected active tracking system will be replaced by OptiTrack if enabled.
  • IMU Merge
    • When this option is enabled, OptiTrack tracking will be merged with the internal IMU sensor data.
    • This can lead to faster tracking response during fast rotational movement.
  • IP Address
    • Can be used to set the IP address of your Motive server (‘Local Interface’ setting in Motive).
    • This should be set to ‘127.0.0.1’ if you are running the VR application on the same computer as the Motive software.
  • Body ID
    • Should be set to the same value as ‘Streaming ID’ of the XTAL headset body in Motive ‘Assets’ – ‘Properties’.
  • Connection Type
    • Can be used to specify a connection type for communication with the Motive software.
    • Should be set to the same option as the selected ‘Transmission Type’ in Motive ‘Data Streaming’.
  • Local IP
    • Can be used to choose a local IP address of your computer, which is on the same network as your Motive software.
    • Selecting a local IP address is only necessary if you have multiple active network cards.

This page was last modified on April 4th, 2025 at 17:08

< PreviousNext >