Overview

Overview page contains generic options for currently selected tracking system.

• Active Tracking
  • Can be used to select which tracking system will be used for tracking the connected headset.
  • Availability of the different tracking options will depend on additional accessories and third-party software (see the Tracking page for details).
• Calibrate Position
  • Clicking the Calibrate button will save the current headset position as origin (0,0,0) for your VR space.
    • When using a room scale application with 0 floor level, we recommend placing the headset on the ground and then pressing this button.
  • Clicking the Reset button will remove previously saved calibration, so raw data from the tracking system will be used.
  • The position calibration will not work if you are using the SteamVR Driver, as in that case the VR space is configured through SteamVR itself.
• Relative to Ground
  • If this option is enabled it will add extra vertical offset to the current headset position to match the bottom of the headset.
  • We recommend using this option when calibrating position of the ground, so the bottom side of the headset will correspond to the floor level.
• Origin
  • Can be used to manually move the tracking origin (X, Y, Z, Yaw) to fine tune the calibrated position.
  • Clicking the Reset button will reset all Origin sliders to default values (0).

This page was last modified on April 4th, 2025 at 16:32

< PreviousNext >