Running VR applications
- Click on ‘Start’ button in DTrack to start the tracking
- Start the VRG Tool service application
- Make sure that you have ART selected as active Tracking option
- You can enable the ART tracking on Settings – Tracking page
- Start the VR software/application
- for example, you can try the demo applications available in the Demos folder
- Go to Settings – Tracking – ART page
- ‘IMU Merge’ option utilizes the internal IMU sensor to achieve better results with 6 DoF tracking systems
- we recommend leaving this option checked for most use-cases
- Choose ‘Axes’ corresponding to your DTrack room setup (see Room calibration)
- Choose ‘Body ID’ corresponding to the ID of the XTAL headset body in DTrack Body administration (see XTAL body setup)
- Choose the desired ‘Port’ for communication with DTrack
- this has to be the same port as you’ve selected during DTrack Output setup
- Choose the ‘Local IP’ corresponding to the IP address of your computer
- only necessary if you have multiple active network cards
This page was last modified on March 22nd, 2025 at 17:36
< PreviousNext >